This 50" model features balsa planking over laser cut poplar plywood frames. The cabin and pilot house are constructed from die-cut and laser cut poplar plywood with expanded pvc sheeting. The kit includes all of the detail pieces such as turned brass stanchions, cast metal parts, several large urethane castings, vacuum formed parts, decals and laser cut detail pieces. A 54 page instruction booklet and 108 corresponding figure drawings walks you step-by-step through construction. And as you would expect from a boat this size, it is a fantastic running model. If you have been thinking you might want to try living large, then you have to take a look at the new Carol Moran.

Length: 50"
Beam: 13-1/2"
Scale: 1/24th

***Note: This kit does not come with a propeller or propeller shaft. All R/C equipment is sold separately.

These items will work great with this tug and will provide significantly more power than the Dumas Running Hardware Kit, to be used on 12 volts:
Motor with Motor Mount: MFA800
Propeller Shaft: HAR2004 (3/16" - Standard 14" Length)
Propeller: PD9011-4 (3/16" Shaft, right or left hand will work fine)
Coupler: MFAC (3/16" x 1/4")

In 1963 the pleasure boating industry was booming with more new boaters than ever before. Unfortunately business was also booming for the Coast Guard with more boating accidents than ever before. They found their answer in their new 44 ft. self-righting Motor Lifeboat. Powered by twin 180 h.p. diesel engines, the boat could achieve speeds of 15 knots and in tests where it towed a 100 ton 95 foot patrol boat, she proved to be a decent little tug as well. Kit 1203 is the all wood version which features plank on frame balsa strip construction, with cleanly die-cut parts for construction of the superstructure. 39 cast fittings and a distinctive Coast Guard insignia decal top off this kit.
To make this kit R/C here is the recommended running gear:
2x MFA01 6-12V Motors
1x DUM2335 Running Hardware Set

Length: 33"
Beam: 9-1/2"
Scale: 1/16

Here is your opportunity to build the pride of the Trojan Yacht Division. The Dumas 31 in. model of the F-31 Trojan Cruiser is a beautiful cabin cruiser that carries distinction when you run her with electric R/C power or build her as the perfect addition to any den or study. She is constructed of rugged die-cut plywood. Included in the kit are numerous detail parts, including a set of 33 cast metal parts, and other decorative items. The Trojan performs beautifully as a radio controlled model.
To make this kit R/C here is the recommended running gear:
2x MFA01 6-12V Motors
1x DUM2335 Running Hardware Set

Length: 31"
Beam: 12"
Scale: 1/12

IMAGES:

Dumas is pleased to be able to take you back to an era of elegance. In 1946 Sparkman and Stevens designed a 66 ft. commuter boat for the express purpose of carrying commuters down the Hudson River into New York. What a glorious way to beat the traffic. These commuters were used by their owners as everyday transportation to and from work, and for pleasure trips to their favorite spots. The most famous of these commuters was the Dauntless. The Dauntless was owned by a prominent New York family. They undoubtedly considered the Dauntless a great diversion from their day to day business dealings. The days of the Dauntless are gone but you can bring them back. The Dauntless features top quality construction materials. The kit is made almost entirely of 1/8 in. mahogany plywood. All parts are cleanly die-cut, and we have included a variety of detail parts including 38 cast metal fittings. The size of the Dauntless leaves the door wide open for different powering methods. The obvious choices would be scale electric power, high speed electric power, or twin gas power, but you may have your own ideas.
To make this kit R/C here is the recommended running gear:
2x MFA01 6-12V Motors
1x DUM2341 Running Hardware Set

Length: 49-1/2"
Beam: 14"
Scale: 1/16

When the crew steps aboard a 41 ft. Utility they never know what the day will bring. They may be policeman as they pursue smugglers, or maybe paramedics as they respond to a distress call. Sometimes they work as a tug boat crew as they tow in an impounded pleasure craft. But the worst job of all is when they become a salvage crew scouting for wreckage and searching for survivors. Here is your chance to feel all the excitement with none of the dirty work. We are proud to offer two sizes of the popular 41 ft. Utility Boat. Kit #1214 is our 31 in. version and is highlighted by its accurately die-cut all wood construction. A highly detailed 32 piece deck hardware fittings set is included to make your model a hit on the mantle or on the water.
To make this kit R/C here is the recommended running gear:
2x MFA01 6-12V Motors
1x DUM2337 Running Hardware Set

Length: 31"
Beam: 10"
Scale: 1/16

Here is your chance to try your hand at being a tow boat captain. But just so you know what you are up against. The American Beauty built by St. Louis Ships for Argi-Trans Services measures 170 feet in length, with a beam of 45 feet, and requires 9 feet of water when fully loaded with fuel. Powered by twin 2500 h.p. diesel engines turning two 8 ft. diameter propellers, she typically moves a tow of 20-25 barges each being approximately 200 feet long by 35 feet wide at speeds of 4 to 9 miles per hour. That is almost 4 acres of barges! Fortunately as modelers, we have life a little easier. The Dumas kit of the American Beauty starts off with an ABS plastic hull. The construction of the superstructure is accomplished through the use of precisely die-cut birch and mahogany plywoods. To complete this kit as the image shows you need to purchase the deck hardware (#DUM2104).

Length: 37"
Beam: 12"
Scale: 7/32 : 1' (~1:54)

The U.S.S. Crockett was one of the seventeen gunboats in the Asheville Class. This class had the distinction of being the first group of Navy Ships to be powered by a gas turbine. The Crockett was capable of a top speed of 50 knots but more impressive still was the fact that she could accelerate her 230 tons from 0 to 40 knots in 60 seconds. The Crockett, stationed in South Vietnam was designed for coastal patrol, blockade reconnaissance, and support missions. But rest assured when duty called, the crew of the U.S.S. Crockett could get there in a hurry. The Dumas model of the Crockett is a builder's boat. She features balsa plank over die-cut mahogany frame construction for the hull, and conventional die-cut construction for the superstructure. #2105 (found below) is an optional deck hardware kit with more than 80 cast fittings. Included in the deck hardware are all the armaments needed to send her in to battle. #2341 (found below) is the twin screw running hardware kit used to drive the Crockett. It has everything needed to complete your drive line except motors. Use two MFA01 Motors (found below) for 6 to 12 volt power. If you are a military enthusiast you will certainly want to try your hand at the Dumas U.S.S. Crockett.
Easily power both motors with the TIO30 (found below) ESC made for LiPO, NiCad or NiMH battery packs from 6-12 volts.

Length: 51"
Beam: 7-1/2"
Scale: 5/16 : 1' (~1:40)

Looks can be deceiving, which is certainly the case with the Creole Queen. When you study the Creole Queen you could easily place her in the days of Mark Twain, wheeling down the Mississippi as onlookers sit fishing off the bank. In actuality, the Creole Queen was built in 1983 for the 1984 New Orleans World Fair. The fact that the Queen looks so authentic is no accident. Even though she is powered by a powerful diesel electric propulsion system, the builders at Halter Marine took every precaution to make sure the Creole Queen had the look of the 1800s. The Dumas model of the Creole Queen is constructed of precision die-cut birch and mahogany plywood. The detail package included in the kit is immense. It has stampings, wood turnings, castings, plastic parts, and a 3 page decal set. For the more adventurous, the size of the Creole Queen leaves the door wide open for those modelers wishing to try less conventional powering methods. Live steam would certainly be a possible option. So if you have always dreamed of building your own working stern wheeler, the Dumas Creole Queen is for you.

Length: 48"
Beam: 10"
Scale: 1/48

Everybody has an opinion as to which boat they like the best. The opinion poll winner is the Victory Tug. There are a number of reasons why this charming little ship has captured the hearts of so many modelers. At 28 inches long, it is perfect for those of us with smaller working areas. The quality materials, such as the bass wood planking, and stainless steel rails lead to an excellent building result. Basically, everybody loves tug boats, and the Victory Tug with all of her natural wood and scruffy good looks is an exceptional find. The Dumas model of the Victory Tug provides all the high quality materials necessary to complete the kit for a static model, but does include the running hardware, ie. shaft, prop, rudder etc. If you do decide to radio control the Victory Tug, all you need are one each of the items found below to get her on the water.

Length: 28"
Beam: 10"
Scale: 1:16

A beauty from yesteryear! Create a legendary masterpiece from our all wood kit of the 1930 24 ft. Chris-Craft Mahogany Runabout. The construction of this kit features a double planked hull with birch plywood on the inside with mahogany strip planking on the outside. A complete set of fittings is also included. Running hardware including shaft, stuffing box, rudder, strut, and a bronze three bladed propeller is also in the kit. They looked great on the lake in the 1930s, and they can look great on the lake again today.

Length: 36"
Beam: 10"
Scale: 1/8

The Jolly Jay has many things going for it, such as mahogany plywood frames, balsa wood planking, pre-formed ABS plastic cabin parts, and complete drive line running hardware, including a 4.8 volt electric motor. Jolly Jay can be radio controlled with a two-channel radio or built for display only. Everyone is sure to enjoy the Jolly Jay.

Length: 24"
Beam: 8-1/2"
Scale: 1/30

This fun little speedster is from the era of big fins and wings. The sporty Cobra model is an all-wood kit featuring a double planked birch plywood and mahogany veneer hull. The two-tone deck is achieved with the use of basswood and mahogany veneer. The hatch and fin section is preformed ABS plastic. Chrome fittings, complete running hardware including a three-blade brass prop, decals and flag complete this blunt nose beauty of the 50s.

Length: 27"
Beam: 9-3/4"
Scale: 1/8

Dumas has done a make-over of our legendary 33in. PT-109. Updated plans and instructions, improved running hardware installation instructions, and added detailing galore are all part of the improved 33in. version of the PT-109. Construction of this kit is out of the high quality die-cut mahogany plywood, expanded PVC and mahogany vaneer planking that you have come to know and expect from Dumas Products. The detailing on this PT-109 is a huge improvement over the old kit. No more penny nails as machine gun barrels. Build your own piece of World War II history with the updated Dumas 33in. PT-109.

Features:
*Die-cut mahogany plywood frame
*Die-cut birch plywood cabins
*Die-cut PVC external sheeting
*Cast metal deck fittings
*Full-color decals
*Step-by-step Instructions
*Full-size drawings

Length: 33"
Beam: 9 "
Scale: 1/30

In 1940 Chris-Craft introduced a new hull style called the torpedo deck or barrel back. Fifty plus years later it is among the most highly coveted of the famed Chris-Crafts, and thanks to the model masters at Dumas, you can own one in miniature. In keeping with the Dumas tradition of Chris-Craft kits, this model features a doubled planked PVC and mahogany veneer hull, preformed plastic seats, chrome fittings, and complete set of running hardware. Color decals and flag and burgee helps set off the model.

Length: 28-1/2"
Beam: 9-1/2"
Scale: 1/8

The Dumas kit of The Mount Washington includes everything needed to bring the original grandeur back to life. An ABS plastic hull and a birch plywood die cut superstructure provide the basic shape, while embossed plastic, cabin detail, cast metal fittings, and full color decals add the touches that make the model complete. Our step by step instructions will help you transform your kit into an historic model that will be sure to find a place in the history of your family.

Length: 44-1/2"
Beam: 12"
Scale: 1/48

The Brooklyn was built in 1910 and owned by the New York Dock Co. Steam powered all her career she was inauspiciously sold for scrap in 1960. She was one of many railroad tugs, designed to transfer railroad cars from one side of New York to the other on barges known as car floats. Railroad tugs almost always towed barges alongside, with one car floating on each side, hence the heavy guards and the use of single posts instead of H-bitts. Railroad tugs were characterized by long houses because there was no need of towing space aft.

The Dumas kit of the Brooklyn is designed to give you the salty appearance of the original boat. Not just your average tug, the Brooklyn has the characteristics that set the early tugs apart. You get a vacuum formed hull, all the parts to build the conventional die cut superstructure, and enough detail (laser cut parts, lots of castings, brass railings, etc.) to keep you busy through many a long winter night. If you are one of many who admire the pugnacious spirit of tug boats then this one is for you. Another classic model from The Model Boat People.

Length: 39-1/2"
Beam: 9-1/2"
Scale: 1/32

Dumas brings the excitement of the roaring 20s with a 1/10th scale model of the TYPHOON. Our exact scale model is based on a full scale reproduction built by Mark Mason, owner of the New England Boat & Motor Co. The construction is a double-planked hull with birch plywood on the inside and mahogany strip planking on the outside. A complete set of chrome-plated deck fittings is included to add the touch of charm and excitement to the elegant racer. Vacuum form seats with full cockpit instrumentation add to the charm. Running hardware including shaft, stuffing box, rudder, strut, and bronze propeller are included. Drawings and a easy-to-follow booklet will guide you through the building of this racing legend.

Length: 42-1/2"
Beam: 8-1/2"
Scale: 1/10

This sporty little speedster from the late 40s is an all-wood kit with a double-planked hull similar to our other Chris-Craft kits. Included in the kit are chrome-plated fittings, vacuum-formed seats, running hardware, and a complete set of flags and decals. The Utility Boat would be a great start into the Chris-Craft line. If you have built the other kits, this will make a nice addition to your fleet.

Length: 24"
Beam: 9"
Scale: 1/8

This sleek beauty is a triple cockpit version of our popular Chris-Craft Barrel Back kit. The Triple Cockpit Barrel Back is 40-1/2". long with a beam of 10-3/4 in.. The kit features a double-planked hull, vacuum formed seats, chrome-plated deck fittings and running hardware. This will make a great addition to your Classic Chris-Craft Series.

Length: 40-1/2"
Beam: 10-3/4"
Scale: 1/8

Style elegance and class the 1954 36ft. Chris-Craft Commander Express Cruiser has it all! The latest addition to our Chris-Craft fleet is also our first cruiser. The 1954 36ft. Chris-Craft Commander Express Cruiser is sure to turn its fair share of heads. The Commander has the quality features you have come to expect from a Dumas Chris-Craft model. This all wood kit includes step by step instructions complete deck fittings vacuum molded seats and laser cut mahogany cabin detail and trim. The Express Cruiser is designed for radio control and twin screw power using two dumas 2004 6v motors. The twin screw running hardware package for the Commander is stock no. 2366 and is sold seperately. Bring style elegance and class to your fleet of Chris-Craft models with the new Commander Express Cruiser

Length: 36"
Beam: 10-3/4"
Scale: 1/12

IMAGES:

The Jersey City is the lasest addition to the Dumas tugboat collection. A railroad tug from the 1960s, the Jersey City can still be seen working on the eastern seaboard. She is designed for radio control using a two channel radio, or this detailed workhorse makes a great static model for your den or office.

The kit features a vacuum formed plastic hull, die cut expanded pvc super structure parts, laser cut wood detail parts, and all the fittings necessary to outfit her for a hard days work.

Dumas running hardware 2367 is the single screw driveline required to run the Jersey City. Use Dumas motor 2004 for 6v or 2005 for 12v electric power.

Length: 36"
Beam: 9"
Scale: 1/32

We think the 1949 Chris-Craft 19 ft. Racing Runabout is our sleekest looking Chris-Craft to date. Our 1/8th scale version of this popular racer is 28 inches long with a 9 inch beam. The wood framed hull is covered with expanded pvc and then planked with mahogany veneer. Like our other Chris-Crafts this kit features the finest materials including chrome plated dack fittings complete drive line hardware flag and burgee. Each kit contains everything needed to build a beautiful static display model for the office or den. Or make her RC with a two channel radio Dumas #2025 motor NiCad batteryand speed control. You will want to make the powerful Racing Runabout the next addition to you fleet.

Length: 29"
Beam: 9"
Scale: 1/8

There is something about a relatively small boat pushing or a towing a comparative behemoth. And at Dumas we are known for our tugs. Whether it be the Shelley Foss, Mister Darby, Brooklyn, or Jersey City, we cover over a century of tugs. With the introduction of the Carol Moran, we have broken into the area of small highly detailed scale rc tugs. Our model of the Carol Moran features a two piece vacuum formed hull. The superstructure is constructed of highly conformable diecut expanded PVC. There are detail parts galore including everything laser cut and cast parts to decals and flag. Just because she is small does not mean you have to give up realism. Best of all, the Carol Moran is a full functioning rc model. All the running hardware is included, and we show you how to power her using a servo from your two channel radio. So try your hand at the Carol Moran. An exceptional tug at an exceptional value.

Length: 17-3/4"
Beam: 5"
Scale: 1/72

This coastal tug built in 1900 not only burned coal for power but also but also hauled barges filled with coal along the New England coast. The Lackawanna was 137 feet long but her gorgeous sheer and festive air made her appear almost yacht like. Our 33 inch model of the Lackawanna captures all the beautiful lines of this classic tug. This kit features a vacuum ABS plastic hull and expanded PVC diecut parts. The Lackawanna is not short on detail with tons of laser cut parts and loads of castings and turnings. Top it off with clear and concise step by step plans and instructions and you have a great kit of an Early 20th Century Tug that is truly a pleasure to build.

Length: 33"
Beam: 6"
Scale: 1/48

The Myrtle Corey is a fine example of a late 1800's river towboat. Typical of the day, these boats were site built, without plans, with lots of substitutions and jury rigged construction. Once commonplace along the waters of the Mississippi and Arkansas rivers, the Dumas model of the Myrtle Corey is designed to bring that amazing era back to life. This kit features vacuum formed hull and roofs. The substructure is made from diecut expanded pvc and there is a load of stripwood to provide the boat with it's characteristic planked deck and cabin sides.
Everything in this kit is designed for detail and realism. We include: castings, wood turnings, laser cut parts and so much more. Even the paddlewheel and rudder hardware is included.

Dimensions:
Length: 38"
Beam: 8-1/4"
Scale: 1/20

Myrtle Corey Photos (click to enlarge):

This sleek little beauty is very similar in construction to our 19' Racing Runabout, kit # 1249, in that it utilizes the popular expanded PVC and mahogany double planking method. The new 16' Hydroplane kit has all the items you have come to expect from a Dumas kit. Step by step instructions, flag, decal, chrome plated fittings, laser cut and die cut parts are all included. Designed for radio control. Includes drive line running hardware. So tame that wild beast inside you and build the new Chris Craft Hydroplane before it gets away.

Length: 24"
Beam: 8-1/2"
Scale: 1/8

This Chris Craft employs plank on bulkhead construction and utilizes our the popular expanded PVC sub-planking and real mahogany exterior planking.
Includes:
-step by step instructinos
-laser and die cut parts
-chrome plated fittings
-colorful flags and decals
-drive line hardware

Length: 30"
Beam: 10"
Scale: 1/8

During WWII, the US Army operated a large fleet of ships. The primary task was to support the fighting man on the ground. Small harbor tugs, designed as ST, were used in large number by the Army to move ships in port and haul fuel and supply barges.

Kit features:
*2-piece vaccuum-form plastic hull
*Die-cut PVC structure
*Laser-cut details
*Full-color decals

Length: 18"
Beam: 4-/34"
Scale: 1/48

U.S. Army 74' St Tug Photos (click to enlarge):

During WWII, the US Army operated a large fleet of ships. The rpimary task was to support the fighting man on the ground. Small harbor tugs, designed as ST, were used in large number by the Army to move ships in port and haul fuel and supply barges.
Kit features:
*2-piece vaccuum-form plastic hull
*Die-cut PVC structure
*Laser-cut details
*Full-color decals

Length: 30-1/2"
Beam: 8"
Scale: 1/30

PT-212 78' Higgins Torpedo Boat Photos (click to enlarge):

The CG 36500 is famous for the rescue of 32 men from the tanker S. S. Pendleton, which broke in half during a winter storm off Chatham Bar, the elbow of Cape Cod (also known as New England's graveyard of ships). To this day, the saving of the Pendleton crew remains the single greatest small-boat rescue in the history of the United States Coast Guard. The crew received the Gold Life Saving Medal for hard work during this cold, dark rescue attempt. This kit features balsa planking over laser cut lite ply frames Detail parts include cast metal fittings, color flags and decals, and a sheet of laser cut birch ply detail pieces. The kit has excellent documentation with it's full size plan, 43 page instruction manual and packet of 59 figure drawings.

Options:
Running Hardware Kit: DUM2371
Motor: MFA01
Speed Control: TIO15
Battery: ONXP5510
Battery Charger: HAR4032
Any transmitter receiver combo will work. Here are our options: RADIOS

Length: 27"
Beam: 8"
Scale: 1:16

The sub-chaser prowled the waters in the Atlantic during WWII, during which time they were credited with sinking a number of U-boats. The SC class served a short time in WWII, but was soon replaced with a more powerful class of sub chasers. This kit features laser-cut plank-on-frame construction.

Length: 37-1/2"
Beam: 4-3/4"
Running Hardware: Click Here

The George W. Washburn was launched by the Cornell Steamboat Company to move barges and cargo like stones, sand, and bricks up and down the Hudson River between Albany and New York City. She was, during her early years, considered the fastest tug on the Hudson. Since she took on paying passengers, her appearance was kept up. It was said that a Cornell Steamboat could be notices from great distances by the yellow and black color of the smoke stacks. Sad to say, however, that the George W Washburn and Cornell Steamboat Company are no longer around today. This kit features laser-cut plank-on-frame construction.

Length: 30"
Beam: 5-1/2"

USCG Fast Response Cutter. This is a model of 154’ USCG Sentinel-Class Cutter and part of the Coast Guard’s Deepwater program of modernizing equipment. Coast Guard boats have always held a prominent position in our line, and as the most modern USCG boat we offer this one is sure to make a splash. Our model of the USCG Fast Response Cutter is constructed of wood and expanded PVC that utilizes die-cut and laser cut parts and features expanded PVC sheet over laser cut plywood frames. This is a highly detailed model that besides all the typical components, is topped off with a 108 piece cast metal fitting set. Use running hardware kit #2382 for twin screw operation.

Length: 39″
Beam: 7″
Scale: 1/48th (1/4″ = 1’0″)

IMAGES: